You will need…
Enter the search term and press "ENTER" .
Bye-bye neighbors: the DIY project against prying eyes in the bedroom!
Project from Chris - 0 CommentsSounds familiar? The sun shines through the bedroom window: wonderful! The neighbor from diagonally above opposite also looks in – no way! Now you can show inquisitive looks into your home the red card. How? With a homemade privacy screen that works well and is simply applied to the bedroom window. Want more good news? OK: the statically adhesive Static Waves privacy foil from d-c-fix® also looks really good with the clean white wavy lines on a milky background. So what are you waiting for: give yourself more privacy and start the Static Waves DIY!
- d-c-fix® Static Waves
- d-c-fix® application kit with doctor blade & utility knife
- d-c-fix® application fluid or spray bottle with water
- Pencil
- Scale
- Ruler
- Cloth
Let’s go!
Here are the instructions for the DIY privacy screen
Step 1
First, measure the window area that is to be made opaque. Then cut the Static Waves privacy foil accordingly.
Step 2
Thoroughly clean the window and wipe it dry. Then moisten the glass surface well using the spray bottle.
Step 3
Remove the backing paper from the cut piece of Static Waves foil.
Step 4
Apply window foil to the edge of the glass surface.
Step 5
Press the foil on by hand and then squeeze out the excess water between the foil and the window pane using the doctor blade.
Step 6
Finally, rub the window dry using a cloth.
You’re done!
Post A Comment
EXPERT ADVICE
Small air pockets can form, especially when covering larger surfaces – such as the top and side surfaces here. You can puncture these bubbles with a fine needle and then carefully smooth them out with the squeegee.
Preparation time
10 min
Execution
15 min
Difficulty level
Easy
Costs
Low
No Comments