You will need…
Enter the search term and press "ENTER" .
A privacy screen for your bathroom!
Project from Chris - 0 CommentsOur Splinter static window film keeps unwelcome glances from outside at bay but still lets enough daylight into your rooms. Thanks to its opaque and textured surface, it also provides cool accents to your windows. And the bet thing is, it sticks without adhesive and can be removed – and applied elsewhere – at any time.
Affixing the privacy screen with our bathroom inspiration in four steps
- A roll of d-c-fix® static Splinter
- d-c-fix® application kit with smoothing blade and cutter knife
- Scissors
- Tape measure
- Spray bottle with water
- A cleaning cloth
Let’s go
Step 1
Measure the dimensions of the window pane that you want to cover and cut the d-c-fix® static window film to size. Leave a gap of 2–3 mm from the window seals.
Step 2
Clean the area thoroughly to remove any dirt or residual grease. Then spray the window generously with water.
Step 3
Remove the thin transparent backing and apply the window film to the pane. Remember to leave a gap to the window seals.
Step 4
When the static film is in the correct position, use the smoothing blade to squeeze out the water between the glass surface and the window film – always working from the centre outwards. Finally, use a cloth to wipe the window dry.
You’re done!
Post A Comment
EXPERT ADVICE
Smoothing out works best if you work from the centre outwards - that way, you press out all the water from under the film. Only then does the film adhere fully.
Preparation time
5 mins
Execution
10 mins
Difficulty level
beginner
Costs
low
Projects you might like
No Comments