You will need…
Enter the search term and press "ENTER" .
A Privacy Screen for Your Windows!
Project from Chris - 0 CommentsThanks to its opaque surface, our static premium Filippa window film keeps unwanted gazes at bay and creates summery accents. We show you how you can apply our films to glass surfaces very easily in just a few steps.
Applying a privacy screen in four steps
- A roll of d-c-fix® static premium Filippa
- A d-c-fix® application kit containing a smoother and a cutting knife
- Scissors
- A tape measure
- A spray bottle containing water
- A cleaning cloth
Let’s go
Step 1
Measure the dimensions of the glass surface that you want to cover and cut the d-c-fix® static premium Filippa window film to size. Leave a gap of 2–3 mm from the window seals.
Step 2
Clean the area thoroughly to remove any dirt or residual grease. Then spray the glass liberally with water until there are no more dry spots.
Step 3
Detach the backing paper from the opaque window film and attach it to the pane. Remember to leave a gap from the seals.
Step 4
When the film is in the correct position, use the smoother to smooth out the water between the glass surface and the window film. The best method is to work your way from the inside out. Finally, use a cloth to wipe the film dry.
You’re done!
Post A Comment
EXPERT ADVICE
If the film does not adhere correctly at the first attempt, you can easily move it thanks to the film of water. If that is not possible, spray a little more water onto the pane and apply the film again. Thanks to the static cling, you can also remove the window film very easily.
Preparation time
5 mins
Execution
20 mins
Difficulty level
beginner
Costs
low
Projects you might like
No Comments