You will need…
Enter the search term and press "ENTER" .
Glitz and glamor for the shoe cabinet!
Project from Cintia - 0 CommentsElegant. Expressive. Individual. You want your interior to be just like you, and you have a taste for a little glamor now and again? Then try out our shoe cabinet makeover, because with the help of the d-c-fix® Metallic Ornament adhesive foil, you can create some glitzy accents in your home. And best of all: This DIY takes up little time and is not too costly. Ready for the wow effect? Then get started now!
- d-c-fix® Metallic Ornament
- d-c-fix® application kit with doctor blade & utility knife
- Pencil
- Tape measure
- Scissors
Let’s go!
Step by step guide for your shoe rack with that wow effect
Step 1
Clean the cabinet fronts, remove the knobs and then measure the fronts.
Step 2
Transfer the measurements to the backing paper of the adhesive foil and cut these out. Be very careful, because the surface of the film is very sensitive.
Step 3
Peel off the backing paper and apply the adhesive foil firmly onto the cabinet front. Here, too, a cautious approach is required.
Step 4
You can trim off any excess adhesive foil using the utility knife.
Step 5
Finally, attach the knobs back onto the shoe cabinet.
You’re done!
Post A Comment
EXPERT ADVICE
Small air pockets can form, especially when covering larger surfaces – such as the top and side surfaces here. You can puncture these bubbles with a fine needle and then carefully smooth them out with the squeegee.
Preparation time
15 min
Execution
30 min
Difficulty level
Easy
Costs
Low
Projects you might like
No Comments