You will need…
Enter the search term and press "ENTER" .
Clever 2-in-1 DIY: Stylish Room Divider and Photo Backdrop
Project from Chris - 0 CommentsWe’ve all been there: the alarm clock doesn’t go off and so you suddenly have to rush like crazy to get ready. In all the hurry, you completely forget that anybody can watch you getting dressed through the window. What’s your best friend in a situation like this? A room divider that not only acts as a privacy screen, but also provides a stylish photo backdrop. Sounds like something you could use? Then go to our DIY here:
- d-c-fix Uni Semi-gloss Apple
- d-c-fix Uni Lack Mint
- d-c-fix Uni Lack Magnolia
- d-c-fix application kit with smoothing blade and utility knife
- Pencil
- Folding rule
- Ruler
- Jigsaw
- 4x hinges
- Long wooden panels
- Screws
Let’s go!
Step-by-step guide for your DIY
Preparation
You have everything you need? Then get started!
Step 1
Draw a round shape onto the wood and saw it out.
Step 2
Measure the dimensions of the cut wooden panel and transfer them to the rear side of the “Uni Semi-gloss Apple” adhesive foil.
Step 3
Use a utility knife to cut the adhesive foil along the ruler.
Step 4
Remove the backing film from the adhesive foil.
Step 5
Using the smoothing blade, press down the adhesive foil onto the wooden panel section by section.
Step 6
Repeat steps 1 to 5 with the “Uni Lack Mint” and “Uni Lack Magnolia” foils. Finally, fasten the hinges to the panels.
You’re done!
Post A Comment
EXPERT ADVICE
Small air pockets can form, especially when covering larger surfaces – such as the top and side surfaces here. You can puncture these bubbles with a fine needle and then carefully smooth them out with the squeegee.
Preparation time
25 min
Execution
30 min
Difficulty level
Difficult
Costs
Average
Projects you might like
No Comments